Our Publications

The Telecommunication Engineering Centre (TEC) has extended the acceptance of Exemptions, Test Reports, and Self-Declaration of Conformity (SDoC) for the specified test parameters under the Essential Requirements (ERs) of the PON Family of Broadband Equipment under the MTCTE scheme..  Key updates effective until 31 December 2026:  Protocol Test for any PON Interface: Test reports for protocol testing, as specified in the Essential

The Government of Goa has introduced a Deposit Refund Scheme (DRS) for beverage containers used for liquor and liquor-based products sold within the state.  The scheme covers packaging made from glass, plastic, metal, and other specified materials, with the objective of improving collection, recycling, and responsible waste management.  If you are a Producer, Importer,

The Central Pollution Control Board (CPCB) has launched a single platform for all EPR waste streams, making registrations and compliance management more convenient for Producers, Importers, Brand Owners, Manufacturers, Recyclers, and other stakeholders.  What’s New?  The portal comes with a refreshed and more user-friendly interface with improved navigation.  Existing registered users can

In continuation of the recent order issued by the Ministry of Electronics and Information Technology (MeitY) regarding verification of the rated/declared capacity of Secondary Li-ion Cells and Batteries, the following implementation framework has been issued for compliance.  Applicability These guidelines apply to all portable Sealed Secondary Lithium-Ion Cells and Batteries covered under IS

The Central Pollution Control Board (CPCB) has been strengthening the implementation of Extended Producer Responsibility (EPR) through dedicated online portals for different waste streams such as used oil, batteries, tyres, plastic, and e-waste.  To further streamline compliance, CPCB has now introduced the Common EPR Single Sign-On (SSO) portal. This system enables stakeholders to

The Bureau of Indian Standards (BIS) has issued implementation guidelines for the revised safety standard IS 16102 (Part 1): 2026, applicable to Self-Ballasted LED Lamps. Earlier, these products were certified under IS 16102 (Part 1): 2012. On 24 February 2026, BIS officially instructed all manufacturers to transition to the new 2026 version of the standard. BIS announced that

The Ministry of Electronics and Information Technology (MEITY) has issued a revised notification dated 02/02/2026, updating its earlier circular dated 26/11/2025 regarding the software update process for ER-Certified IP Cameras.  The main objective of this revision is to give OEMs additional time to address issues and ensure that devices remain secure, up to date, and compliant.  Note: Only the key changes are

The Government of India has updated the timeline for the implementing of IS 18112, an Indian Standard related to Digital Television Receivers used in television sets for the reception of digital satellite Free-To-Air (FTA) TV and radio signals. Originally, through the IS 18112 implementation order issued on 26 April 2023, television sets were brought under the Compulsory

The Telecom Engineering Centre (TEC) has issued a notification on 1st July 2026 extending the exemptions from the submission of test reports for specific test parameters related to specific test parameters under the Essential Requirements (ERs) listed below.   Validity: These exemptions are applicable until December 3, 2026    S.No.  Product/ER Variant  Parameter Name (as per ER)  Standard Name (as per ER)  Remarks  01  Mobile Radio Trunking system  Frequency

The Department of Telecommunications (DoT) has issued an Official Memorandum No. R‑11018/13/2026‑PP dated 02 July 2026. As per the memorandum, the processing of Dealer Possession License (DPL), Non-Dealer Possession License (NDPL) and Manufacturing & Testing Licenses has been suspended with immediate effect. However, Standard clearances for license-exempt bands via the self-declaration (ETA-SD) will continue to function normally under the

The Department for Promotion of Industry and Internal Trade (DPIIT), Ministry of Commerce & Industry, has issued two amendment notifications to the Footwear Quality Control Orders, 2024, covering:  Footwear made from All Rubber and All Polymeric Material and its Components, and  Footwear made from Leather and Other Materials.  Under these amendments, the orders

The Ministry of Health & Family Welfare has proposed another draft amendment to the Medical Devices Rules, 2017, inviting stakeholder feedback.  Key Highlights  ▪️ New Definition Introduced “Certificate of Registration” has been clearly defined, covering registrations issued on Forms MD-2, MD-40, and MD-42.  ▪️ Labelling Requirement for Outsourced Sterilisation Manufacturers outsourcing sterilisation must now mention

On June 9, 2026, the Ministry of Textiles officially cancelled the Quality Control Order (QCO) for cotton bales with immediate effect. This means that the mandatory quality standards introduced under the 2023 order are no longer applicable. The government made this decision in the public interest under the powers given

The Central Pollution Control Board (CPCB) has announced that the existing Plastic Waste EPR Portal has been discontinued with effect from 28th June 2026.  The new Common EPR Portal is expected to go live during the first week of July 2026. Data of all registered entities will be migrated to

Department for Promotion of Industry and Internal Trade (DPIIT) has introduced the Transition Facilitation (Quality Control) Order, enabling manufacturers to obtain BIS licenses under Scheme-II for certain products covered under existing QCOs (Scheme I). This provision is applicable only for supplies made to entities that have obtained specific permission from DPIIT.  Covered Products for which

With increasing awareness around UV protection and skin health, BIS has introduced IS 19685:2026, a comprehensive standard for sunscreen cosmetic products aimed at ensuring product safety, performance, and reliable consumer protection.  Sunscreen products are widely used to help prevent sunburn, premature skin ageing, and risks associated with harmful UV exposure. The

The Ministry of Communications (Department of Telecommunications) has issued G.S.R. 466(E), introducing the Use of On-Board Unit for Cellular Vehicle-to-Everything (C-V2X) Communication in the 5.9 GHz Band (Exemption from Licensing Requirements) Rules, 2026.   This development is a major step toward enabling connected and intelligent transportation systems in India. It allows the deployment

The Ministry of Communications (Department of Telecommunications) has officially published G.S.R. 468(E), introducing the Use of Short-Range Automotive Radar System in the 77–81 GHz Band (Exemption from Licensing Requirements) Rules.    This means companies no longer need a frequency assignment to use these bands for the Short-Range Automotive Radar System. All

The Department of Consumer Affairs has issued an advisory under the Legal Metrology framework recommending standardised pack sizes for major edible oils to enhance consumer transparency, facilitate price comparison, and promote uniform packaging practices across the industry.  Prescribed Standard Pack Sizes  For major edible oils such as palm oil, soybean

The Bureau of Energy Efficiency (BEE) issued an advisory in June 2026 to guide manufacturers through the implementation of a new star label design for appliances.  Effective from July 1, 2026, these regulations clarify that equipment with existing valid approvals does not require fresh authorisation just to adopt the updated

Earlier this year, the Ministry of Electronics and Information Technology (MeitY) introduced a dedicated digital process on the ICEGATE portal for obtaining exemptions for Highly Specialised Equipment (HSE) under the Compulsory Registration Order (CRO), 2021.  To assist stakeholders, a comprehensive User Manual has now been issued to navigate the ICEGATE

The Ministry of Electronics and Information Technology (MeitY) has revised IS 16102 (Part 1):2012 and IS 10322, updating them to IS 16102 (Part 1):2026 and IS 10322:2026. The revised series guidelines for these standards are as follows:  Definition of Product Family:  A product family is defined as a group of

The Wireless Planning and Coordination (WPC) Wing of the Department of Telecommunications (DoT), through Public Notice No. R-11010/02/2026-PP has extended the window for certificate withdrawal. Accordingly, the revised mandatory deadline for completing this regulatory transition is 6 July 2026.  This extension gives OEMs and importers the necessary timeframe to align their existing products

The Department of Consumer Affairs, Government of India, has issued an advisory clarifying the use of customary units such as inches, feet, yards, square feet, and dozen as supplementary declarations alongside standard SI units under the Legal Metrology framework.  Key Clarifications  Standard SI metric units remain the legally recognised units under the Legal

Ministry of Environment, Forest and Climate Change (MoEFCC) has launched a Centralised Digital Portal under CPCB for Solid Waste Management compliance. As per the Solid Waste Management Rules, 2026. Its aim to strengthen scientific waste management, improve stakeholder accountability, and promote sustainable waste handling across India.  Who Must Register:  Bulk Waste Generators  Urban Local Bodies  Waste

The Bureau of Indian Standards (BIS) has introduced an important update under the Compulsory Registration Scheme (CRS).  As per the recent BIS Conformity Assessment Amendment Regulations, 2026, the validity of BIS registration has now been extended to 5 years, replacing the earlier validity period of 2 years at the time

A recent regulatory update brings an important shift in how waste management will be handled in India.  The Supreme Court of India has directed the Central Government to assign its powers to District Collectors across the country for a period of one year.  District Collectors will now be responsible for

The Ministry of Electronics and Information Technology (MeitY) has issued the much-awaited Series Guidelines for products covered under IS/IEC 62368-1:2023.  Under these guidelines, multiple models can now be included under a single BIS registration, provided the models comply with all prescribed criteria.  Key Highlights of the Series Guidelines  Under the

The Ministry of Commerce & Industry (DPIIT) has released a draft notification proposing amendments to the Ammonium Nitrate Rules, 2012, under the Explosives Act, 1884.   What’s New?    Inclusion of Consignee  The term “consignee” is now being formally included along with consignor in transport-related provisions, expanding responsibility across stakeholders.    Transport License Clarification  Clear guidelines introduced:  

The Legal Metrology (Packaged Commodities) Rules, 2011 (LMPCR) regulate labelling and declaration requirements for pre-packaged commodities sold in India.  Manufacturers, importers, and packers must ensure that mandatory declarations are properly displayed on product packaging, including:  Name & address of manufacturer/importer/packer  Country of origin (for imported products)  Net quantity  Month & year

The Ministry of Environment, Forest and Climate Change (MoEF&CC) has officially notified the Solid Waste Management (SWM) Rules, 2026 under the Environment (Protection) Act, 1986, effective from 1 April 2026  These new rules will replace the SWM Rules, 2016, while ensuring that all earlier actions and compliance requirements remain valid.  Who needs to follow these rules? 

A new update has been introduced under the End-of-Life Vehicles (ELV) Rules, 2025. CPCB has now activated the EPR Certificate Generation & Transfer Module on the centralised portal for Producers and Registered Vehicle Scrapping Facilities (RVSFs).  Who comes under this?  Producers – Companies involved in manufacturing, assembling, importing, or selling vehicles

The Saral Sanchar (WPC) Portal has been updated in accordance with GSR 47(E), issued on 20 January 2026. Applicants can now include the 6 GHz de-licensed frequency band (5945–6425 MHz) while applying for the WPC ETA-SD certificate. Key Points:  New Applications: The 6 GHz band (5945–6425 MHz) can now be included under ETA-SD filings. Already

Portable Li-ion cells and batteries are covered under IS 16046-2, where manufacturers declare the rated capacity of the cells and batteries. Recently, several instances of misdeclaration of rated capacity have been observed.    To safeguard consumer interests, the Ministry of Electronics and Information Technology (MEITY) has issued an order mandating testing

The Telecom Engineering Centre (TEC) has issued a notification dated 2 February inviting inputs and suggestions on the existing MTCTE Procedure v3.0 (TEC 93009:2024).  This proposed update aims to review and align the current MTCTE procedure with the Telecommunications (Framework to Notify Standards, Conformity Assessment and Certification) Rules, 2025, notified on 16 May 2025.  All

The Telecom Engineering Centre (TEC) has officially issued an updated version of the Essential Requirements (ER) for IP Security Equipment on 01 February 2026. This update introduces four new variants under the scope of IP security compliance:   Data Loss Prevention Equipment Network Data Encryption Equipment Secure Telemetry Equipment Secure Web Gateway Equipment The mandatory compliance date for

The Ministry of Consumer Affairs has introduced an important amendment to the Legal Metrology (General) Rules, 2011, focusing on clinical electrical thermometers for continuous measurement. Key Highlights  ▪️ New Standards Introduced A new Part D has been added under the Eighth Schedule, defining metrological and technical requirements for clinical electrical thermometers used in medical settings (e.g.,

Cambodia’s MPTC and TRC have released draft regulations covering technical standards, type approval, and conformity assessment for telecom equipment. Stakeholders are invited to submit feedback until 25 May 2026 before finalisation.  Key Highlights  TRC Type Approval Certificate mandatory for telecom equipment Applies to importers, distributors, suppliers, and users Equipment classified based on risk:   Type A: Low

The Bureau of Indian Standards (BIS) has introduced a new online portal under the Manak Online system for Foreign Manufacturers Certification Scheme (FMCS) applications.  This portal has been introduced to make the BIS certification process more digital, faster, and easier for foreign manufacturers exporting products to India. The system will

Planning to export or sell products in Oman?  Compliance with local regulations is essential for seamless market entry.  Key Requirement  Many products require certification under the Omani Quality Mark (OQ Mark), governed by DGSM, along with applicable GSO standards.  Who It Applies To  Manufacturers, importers, and distributors placing regulated products in the

The Bureau of Energy Efficiency (BEE) has issued a final compliance alert for manufacturers and registered entities with pending obligations under the Standards & Labelling programme for FY 2017–18 to FY 2024–25.    Companies are required to regularise all outstanding compliance issues, including pending production data submissions and unpaid labelling fees, on or

The Ministry of Electronics and Information Technology (MeitY) has issued a legislative update amending the 2021 Compulsory Registration Order (CRO) by specifically including Standalone Hard Disk Drives (HDDs/Hard Drives) under the list of regulated electronic goods.  Applicable standard for the Standalone Hard Disk Drives (HDDs/Hard Drives) required to comply with Indian Standard IS 13252 (Part 1): 2010. 

The Ministry of Consumer Affairs has notified an important amendment to the Legal Metrology (Packaged Commodities) Rules, 2011, aimed at enhancing transparency in e-commerce.  Key Highlight  Mandatory Country of Origin Filter E-commerce platforms selling imported products must now provide a searchable, sortable filter that clearly specifies the country of origin for such products. Effective Date This amendment

The Draft Food Safety and Standards (Packaging) Amendment Regulations, 2026 have been released by FSSAI for public consultation on 28th April 2026.  Key proposal: Introduction of specific packaging requirements for pan masala  Only the following packaging materials will be allowed:  Paper, paperboard, or natural-origin materials (without any plastic content)  Tin or glass containers  Use of plastic materials (including

This official advisory from India’s Bureau of Energy Efficiency outlines updated compliance requirements for manufacturers of cooling systems, under which the respective department has extended the validity of the existing star rating table for chillers and side-by-side multi-door refrigerators. The new validity periods are as follows:   Product   New Validity   Chillers 1st July 2026 to 31st December 2029  Side

The Communications Regulatory Authority (CRA) of Qatar has released an updated version of the Qatar National Frequency Allocation Plan (QNFAP), aligning with the outcomes of the World Radiocommunication Conference 2023 (WRC-23) and recent public consultations.    This update reflects rapid developments in the ICT and radiocommunication sectors while ensuring alignment with international

Modern CCTV and video surveillance systems are no longer isolated recording devices. They operate as interconnected IoT endpoints with web interfaces, RTSP streaming services, cloud synchronisation modules, mobile application APIs, and remote administration capabilities. In many enterprise environments, these systems are deployed with direct network exposure and minimal hardening.  This

South Korea’s MSIT has issued Notice 2026-10, increasing PSD limits in the 5925–6425 MHz band to support advanced indoor wireless technologies.   Key Changes  Increased Power Spectral Density (PSD) limits  Introduction of a linearly decreasing PSD profile  Enhanced limits for indoor use in 6 GHz band Scope & Compliance  Applies to indoor wireless devices using the 6 GHz band 

The Ministry of Chemicals and Fertilisers has announced temporary relaxations under the Quality Control Orders for Linear Alkyl Benzene (LAB) and Morpholine in light of ongoing global supply chain disruptions.  What has changed? The government has temporarily suspended mandatory BIS compliance requirements for:  Linear Alkyl Benzene (LAB) as per IS

Oman’s DGSM has made it mandatory for bottled drinking water products to obtain the Omani Quality Mark (OQ Mark) certification to ensure compliance with national standards.   Key Points  Applies to manufacturers, importers, and distributors Covers bottled drinking water & natural mineral water Compliance as per OS GSO 1025 & OS GSO 987 Timeline  Effective: 15 March 2026 

The Bureau of Energy Efficiency (BEE) has issued a final directive for manufacturers and permit holders to complete their Standards & Labelling (S&L) compliance for FY 2024–25.    All regulated entities must:  Submit production data  Pay all applicable labelling fees  Deadline: May 31, 2026     Failure to comply may result in:  10% financial penalty  Suspension

The Department for Promotion of Industry and Internal Trade (DPIIT) has extended the implementation timeline for the Safety of Household, Commercial, and Similar Electrical Appliances under IS 302 (Part 1). This extension provides additional time for manufacturers and stakeholders to align with the new regulatory requirements.  Revised Implementation Timeline  1 October 2026:Large Scale Manufacturers  (Earlier implementation date

The Ministry of Environment, Forest and Climate Change (MoEF&CC) has extended the deadline for filing returns under the Used Oil EPR framework for FY 2024–25. This extension follows representations from industry stakeholders, based on which the Central Pollution Control Board (CPCB) recommended revising the earlier timeline.  New deadline: 31 March 2026 (Earlier deadline: 31 December 2025) Applicability:

The Bureau of Indian Standards (BIS) has extended the implementation date of IS 302 (Part 1): 2024 /IEC 60335-1:2020, which covers the safety of household and similar electrical appliances. This extension specifically applies to adapters for household and similar electrical appliances under the Compulsory Registration Order (CRO).  As a result,

The Ministry of Electronics and Information Technology (MeitY) has issued a series of guidelines for Extended Reality (XR) products. These guidelines allow multiple models to be covered under one registration, as long as they meet the specified conditions.  The Extended Reality product category has been newly added under BIS-CRS and is effective from 05 December 2020. 

TEC has clarified that OEMs must not submit multiple MTCTE applications for the same equipment with the same model number if a valid Certificate already exists. Any existing duplicate applications/certificates must be reported to TEC by email to adgtc2-tec-dot@gov.in before 31st of Jan 2026.  If duplicate applications are detected later, all ongoing applications will be rejected, and existing certificates may be cancelled. Applications

The Ministry of Electronics and Information Technology (MEITY) has released a circular detailing the software update process for ER-Certified IP Cameras. OEMs are required to proactively monitor, document, and report all firmware & other changes to the Bureau of Indian Standards (BIS) via BIS CCL update process, ensuring strict compliance with security protocols and End-of-Life (EoL) requirements. Compliance Blueprint (Effective

On 18 December 2025, MEITY issued a notification to simplify the process of CCTV.  Camera Testing & Evaluation under BIS CRO and STQC IoTSCS PPO Scheme. Key Clarifications  BIS CRO – Test Report Validation not required.  STQC IoTSCS PPO – Test Report Validation is mandatory.   The Issue   Applicants have been applying for PPO certification after completing CRO testing to bypass the validation requirement under IoTSCS. This practice has caused:  Procedural

The Ministry of Electronics & IT (MeitY) has issued an Office Memorandum dated 16 Jan 2026 regarding compliance with Essential Requirements (ERs) for the security of CCTV cameras under the CRO.  Key Highlights  No further relaxation –existing stock clearance period is nearing its end.  Extension permitted for sales of CCTV cameras manufactured or imported before 9 April

The Bureau of Indian Standards (BIS), along with the Ministry of New and Renewable Energy (MNRE), under the Solar Systems, Devices and Components Goods Order, 2025, hereby notifies the implementation of the revised standards IS/IEC 61730-1:2023 and IS/IEC 61730-2:2023, superseding IS/IEC 61730-1:2016 and IS/IEC 61730-2:2016 for Solar PV modules.  These standards specify the construction and testing requirements for safety

Permittees registered for appliances like Air Conditioners (Unitary and Split type AC) under the S&L program of BEE, are hereby informed that the new star rating table with updated efficiency parameter, as well as a new validity period, has been introduced.  Key Takeaways All the permittees wishing to continue their

The Telecom Engineering Centre (TEC) has issued a new notification on 29th dec 2025 granting exemptions from the submission of test reports for specific test parameters related to Below ERs. Validity: These exemptions are applicable until June 30, 2026  S.No.   Product/ER Variant   Parameter Name (as   per ER)   Standard   Name   (as per ER)   01   Mobile Radio Trunking system   Frequency Band for MRTS   NFAP, Annex-C1  Conformance

The National Centre for Communication Security (NCCS) has officially issued the ITSAR (Indian Telecom Security Assurance Requirements) for O-RAN of 5G: O-RU, O-DU, O-CU and O-RAN. of 5G: RIC. The mandatory date of implementation is expected to be released soon. This is a significant step toward strengthening security, trust, and interoperability in the Open RAN ecosystem and accelerating the

The Bureau of Indian Standards (BIS) has issued a new circular clarifying that maintaining an in-house laboratory is no longer mandatory for manufacturers operating under BIS product certification scheme.  Manufacturers can now opt for alternative testing arrangements such as: • Shared or common testing facilities • Cluster-based testing facilities • Sub-contracting testing to BIS-recognized or ISO/IEC 17025

The Government of India (Ministry of Heavy Industries) has withdrawn the Machinery and Electrical Equipment Safety (Omnibus Technical Regulation) Order, 2024, commonly known as Scheme-X (OTR). This withdrawal was officially notified on 14 January 2026. Background  The OTR-2024 was first notified on 28 August 2024 to strengthen safety requirements for a wide range of machinery

The Telecom Engineering Centre (TEC) has issued a new notification granting exemptions from the submission of test reports for specific test parameters related to LAN Switch ERs.  Validity: These exemptions are applicable until April 30, 2026.  S.No.  Product/ER Variant  Parameter Name (as per ER)  Standard Name (as per ER)  01  Fabric Interconnect switch  Fibre Channel Frame  Encapsulation  RFC 3643  Annex-P11  Fibre Channel Static  Routing  RFC 2625  Annex-P11 

The Telecom Engineering Center (TEC) has announced that, until June 30, 2026, test reports accredited by the International Laboratory Accreditation Cooperation (ILAC) from non-border-sharing countries will be accepted for the technical parameters of specified products under the MTCTE. Sr. No.  Equipment (ER)  Variant        1  Base Station for Cellular Network  1. Active Antenna System-OTA  2. Base Station 5G

Regulatory Update From DPIIT-BIS on Flux Cored Solder Wire  The Department for Promotion of Industry and Internal Trade (DPIIT) has officially withdrawn the “Flux Cored Solder Wire (Quality Control) Order, 2023 as per IS 15769:2008.”  As per the latest notification issued by the Department for Promotion of Industry and Internal Trade (DPIIT) on 12 January 2026, this Quality Control Order is no longer applicable. This order has

The Ministry of Electronics and Information Technology (MeitY) has extended the compliance deadline for IS 18112 (Digital Television Receiver for Satellite Broadcast Transmission — Specification) under the Compulsory Registration Order (CRO). This decision was made after discussions with industry stakeholders to ensure a smooth implementation process.  New Compliance Deadline:  Standard 

The Ministry of Electronics and Information Technology (MeitY) has issued the Guidelines for the implementation of revised IS 18112 “Digital Television Receiver (DTR) for Satellite Broadcast Transmission Specification” on 14th October 2025. Following this, the Ministry also released an extension to allow Industry and Labs to prepare themselves via notification

The Central Pollution Control Board (CPCB), via its communication dated 18th September 2025, has announced an extension in the timeline for filing Annual Returns under the Plastic Waste Management Rules, 2023, for the FY 2024 -25.      New Deadline: 30th November 2025  Note: All registered Producer, Importer and Brand Owner (PIBOs)

Permittees registered for appliances like Frost-Free and Direct Cool Refrigerators, Ceiling Fan and Deep Freezer under the S&L program of BEE, are hereby informed that the new star rating table with updated efficiency parameter, as well as a new validity period, has been introduced.  Key Takeaways for:  Deep Freezer  The

BEE Labelling Now Mandatory for Grid-Connected Solar Inverters from January 2026  Grid-connected solar inverters have officially moved from the voluntary to the mandatory regime under the BEE Standards & Labeling (S&L) Scheme, effective January 2026.  Products Covered Under the BEE S&L Scheme  The mandatory labelling requirement applies to:  Grid-connected (on-grid) solar inverters without energy storage  Single-phase and three-phase inverters  Inverters

Industry Consultation on Hypervisor Essential Requirements (ER) MAIT, in collaboration with TEC, has initiated a process to review the existing Essential Requirements (ER) for Hypervisors.  The objective of this meeting is to gather inputs from industry members regarding the need for any revisions or updates to the current Hypervisor ER (ER link) (ER link).  We encourage all

The Bureau of Energy Efficiency (BEE) has extended the validity of the existing star rating table of  Microwave Ovens and Air Compressors. The new validity periods are as follows:  Product  New Validity  Air Compressors 8th March 2019 to 31st December 2026 Microwave Ovens 11th January 2021 to 31st December 2026 

The Central Pollution Control Board (CPCB), under MoEF&CC, issued a detailed guidance document (Aug 2025) to streamline Extended Producer Responsibility (EPR) Adjustments for producers (Importer) of base oil and lubrication oil.    As per the module, registered producers can now make target adjustments via the CPCB Used Oil portal. This module

The Central Board of Indirect Taxes & Customs (CBIC) has launched a new online system called ACE (Automation of Certificate of Exemption) to simplify the issuance of Concessional Customs Duty Certificates (CCDC) and CRO Exemption Certificates by MeitY.      This initiative is part of the government’s SWIFT 2.0 (Single Window

BIS has upgraded the LED module safety standard from IS 16103 (Part 1):2012 to IS 16103 (Part 1):2025 / IEC 62031:2018 through a notification dated 09 September 2025. The initial implementation deadline was 21 January 2026.  Following industry feedback, BIS has now extended the compliance deadline to provide relaxation to manufacturers and importers. 

This is to inform you that Induction hob will be transition from the voluntary to mandatory regime of BEE from the next year in the July month. The mandatory BEE star labelling requirement will be effective from 1 July 2026.  For general knowledge, products covered under BEE scope include:  All types of countertop induction

The National Centre for Communication Security (NCCS) has issued a new notification regarding the ‘ONU’ variant listed under ER ‘PON Family of Broadband Equipment.’ As outlined in the Scope section of the ITSAR ‘NCCS/ITSAR/Customer Premises Equipment/PON CPEs/Optical Network Terminal (ONT) – PON Family Broadband Equipment-V1.0.1’ (released on 24.11.2023), the ITSAR applies to both ONT and ONU devices. Accordingly, all instructions, circulars, OMs, and notifications issued by NCCS

The Wireless Planning and Coordination (WPC) Wing has released the most awaited National Frequency Allocation Plan 2025—Map of India’s connectivity landscape. Here’s what every compliance and telecom professional needs to know: Key highlights:  5G Expansion & New IMT Bands: NFAP-2025 identifies new frequency bands (6425 – 7025 MHz, 7025 – 7125 MHz) for IMT-2020 (5G) services, providing additional spectrum capacity and enabling

In continuation of Office OM No. NCCS/HQ/COMSEC/2021-22/III-Part(1) dated 17 February 2025, the National Centre for Communication Security (NCCS) has granted approval for the continuation of the Pro Tem Certification Scheme. The scheme, originally valid up to 31 December 2025, has been extended by two years and will now remain in force until 31 December 2027.  This extension reinforces our ongoing commitment

The National Centre for Communication Security (NCCS) has issued a notification on PON ONT certification after considering industry inputs. The testing and certification process for ONT devices and their customized variants has been streamlined to reduce duplication while maintaining strong security assurance.   Key highlights:  Mandatory Security Testing: Security testing is required only for unique SoC–SDK combinations, additional variants using the same combination are

The National Centre for Communication Security (NCCS) has officially issued the ITSAR (Indian Telecom Security Assurance Requirements) for Layer 2 and Layer 3 LAN Switches. This marks an important step toward strengthening telecom and network security compliance in India.  The mandatory date of implementation is expected to be released soon.   Organizations and manufacturers can start reviewing the

The Bureau of Indian Standards (BIS) has revised IS 16103 (Part 1):2012 and published it as IS 16103 (Part 1):2025 / IEC 62031:2018. This standard specifies the safety requirements for LED modules used in general lighting. Highlight Point:   Both the old (2012) and new (2025) versions will run concurrently up

The Bureau of Indian Standards (BIS) has officially extended the implementation timeline for the revised standard Cross Recessed Screws (Quality Control) Order, 2025. Originally scheduled for implementation on 1st March 2025 Now extended to 1st November 2025 – an 8-month extension on the implementation. What does this mean? Manufacturers, importers,

The Bureau of Indian Standards (BIS) has extended the implementation deadline for the revised IS 15449 (Part 1): 2024, covering household zig-zag sewing machines, to 12 February 2026, from the earlier deadline of 12 May 2025. Key Updates: The earlier IS 15449 (part 1): 2004 will run concurrently with the

In continuation of the earlier notification dated 07.04.2025, the National Centre for Communication Security (NCCS) has released a new notification regarding the PON, ONT and OLT products’ security certification. The key points of this document are: Optical Network Terminal (ONT) and Optical Line Terminal (OLT) products will remain under the

Gold, a traditional and trusted investment for Indian households, has seen significant price increases in recent months. It has expanded out to a range of several sections of society, including middle and lower-middle income groups.   To ease the financial burden on these groups, the Government of India, in collaboration

To align with India’s energy-saving goals and ensure effective implementation of the Standards & Labeling (S&L) Program, the Bureau of Energy Efficiency (BEE), through its latest notification dated 30th July 2025, has directed all Manufacturers/Permittees registered under the S&L scheme to update the list of authorised distributors, dealers, retailers, and

The Bureau of Indian Standards (BIS) has issued guidelines regarding the implementation of the revised standard for Uninterruptible Power Systems (UPS) – IS 16242 (Part 1):2025 / IEC 62040-1:2017. Highlight Points:  The revised standard replaces IS 16242 (Part 1):2014 / IEC 62040-1:2008. Both standards will run concurrently only up to

The Bureau of Indian Standards (BIS) has issued Amendment No. 1 to IS 16270:2023 for Secondary Cells and Batteries used in Solar Photovoltaic (PV) Applications. These changes will come into effect from December 8, 2025.   Below is a summary of the key changes and the actions required:  S. No.  Page

In response to the growing emphasis on energy security, the Ministry of Power, in consultation with the Bureau of Energy Efficiency (BEE), has officially brought Domestic LPG Stoves under the mandatory regime of BEE’s Standards & Labelling (S&L) Scheme.  Important: Domestic LPG stoves already require ISI certification. Now, BEE certification

As India continues to strengthen its regulatory framework for electrical and electronic equipment, the spotlight today is on a crucial category: High-voltage Switchgear and Control Gear Equipment (above 1000V)—now officially brought under the ambit of Bureau of Indian Standards Scheme X – Omnibus Technical Regulation (OTR). These high-voltage systems are

Today, we spotlight a critical category now under the regulatory spotlight: Switchgear & Control Gear Equipment operating at voltages up to 1000V, now officially covered under the Bureau of Indian Standards Scheme X – Omnibus Technical Regulation (OTR). These components are essential for managing, isolating, and protecting electrical circuits across a

As we approach the final stretch of our series, today’s focus is on another critical category under the BIS Scheme X – Omnibus Technical Regulation (OTR): Power Semiconductor Converters. These devices form the backbone of modern electrical and power systems, enabling energy conversion and control in industries, infrastructure, and renewable

Under the BIS Scheme X – Omnibus Technical Regulation (OTR), another key category comes into focus: Diesel Generators. These power solutions, widely used across various industries, will soon be subject to mandatory BIS certification requirements. Scope of Regulation: This regulation applies to all types of diesel generators and their assemblies, sub-assemblies,

Today in our 30-day journey through BIS Scheme X – Omnibus Technical Regulation (OTR), we spotlight a crucial mechanical category: gears, gearing systems, and related transmission devices, which will soon require mandatory BIS certification. Scope of Regulation: This regulation applies to all types of: Gears and gearing Toothed wheels Chain

As we move closer to the end of our series, today we turn our attention to another key segment impacted by the BIS Scheme X – Omnibus Technical Regulation (OTR): machinery for public works, building, and other specialised mechanical appliances with individual functions. Scope of Regulation: This regulation applies to

The BIS Scheme X – Omnibus Technical Regulation (OTR) continues to expand its scope, and this time it impacts manufacturers and importers of machinery used in rubber and plastics processing. Under this regulation, obtaining BIS certification will soon become mandatory for these machines to be sold or operated in the

The compliance under the BIS Scheme X – Omnibus Technical Regulation (OTR) continues to expand, and this time it impacts businesses that deal with machinery for working stone, ceramics, concrete, asbestos cement, or mineral glass. Starting 1St September 2026, BIS certification will be mandatory for all such machines, including their assemblies,

India’s manufacturing ecosystem is moving towards stronger compliance, and metal cutting machine tools are next in line under the Bureau of Indian Standards Scheme X – Omnibus Technical Regulation (OTR). From September 1, 2026, BIS certification will be mandatory for all metal cutting machine tools, including their assemblies, sub-assemblies, and

The textile and apparel sector continues to come under closer regulatory attention. As part of the Bureau of Indian Standards Scheme X – Omnibus Technical Regulation (OTR), it will soon become mandatory to obtain BIS certification for all types of embroidery-making machinery, as well as their assemblies, sub-assemblies, and components.

The textile industry is now under sharper regulatory focus. As part of the Bureau of Indian Standards Scheme X – Omnibus Technical Regulation (OTR), all types of weaving machines and their components must obtain BIS certification to be legally manufactured, sold, or imported in India. Scope of Regulation: Applies to

If you’re a manufacturer or importer of heavy-duty equipment used in construction, earthmoving, or mining operations, this update from Bureau of Indian Standards is critical for your business. Under the BIS Scheme X – Omnibus Technical Regulation, it will soon become mandatory to obtain BIS certification for a wide range

If you’re a manufacturer or importer of cranes, this update from the Bureau of Indian Standards is one you simply can’t afford to miss. Under the BIS SchemeX – Omnibus Technical Regulation (OTR), it will soon become mandatory to obtain BIS certification for all types of cranes intended for sale,

If you are a manufacturer or importer of packaging and bottling machinery, this regulation is crucial and should not be overlooked. Under the BIS Scheme X – Omnibus Technical Regulation (OTR), it will soon become mandatory to obtain BIS certification for machinery used in filling, closing, sealing, labelling, packing, or

As India tightens its regulatory lens on industrial equipment, manufacturers and importers of filtering and purifying machinery must prepare for a significant update. Under the BIS Scheme X – Omnibus Technical Regulation (OTR), it will soon be mandatory to obtain BIS certification for centrifuges and machinery used for filtering or

As India strengthens its regulatory framework, businesses dealing with machinery used for the treatment of materials must prepare for an important update. Under the Bureau of Indian Standards Scheme X – Omnibus Technical Regulation (OTR), it will soon be mandatory to obtain BIS certification for all types of machinery that

Today’s insight focuses on compressors—a key category now brought under the Bureau of Indian Standards Scheme X–OTR (Omnibus Technical Regulation). This regulation covers all types of compressors, including their assemblies, sub-assemblies, and components. If your products fall into any of these categories, compliance is non-negotiable. Types of compressors included: Centrifugal

As we move further into our series, today, we spotlight a crucial product category under the Bureau of Indian Standards Scheme X – Omnibus Technical Regulation (OTR): pumps and liquid-handling equipment. A wide range of pumps will soon fall under mandatory BIS certification, making compliance essential for manufacturers and importers

Today, we’re talking about a major regulatory advancement – Omnibus Technical Regulation (OTR) 2024, introduced under Scheme X by the Ministry of Heavy Industries (MHI), Government of India (GoI) Aimed at strengthening the safety of heavy machinery and electrical equipment, this regulation is set to take effect from September 1,

Today, we shift our focus to a critical safety component: electrical emergency stop devices with mechanical latching functions. These devices play a vital role in preventing accidents and ensuring the rapid shutdown of machinery during emergencies. The applicable Indian standard is IC/IEC 60947: Part 5: Section 5: 2016, which outlines the

Today’s highlight is on proximity switches—a key category of control circuit devices and switching elements that are widely used in automation and industrial control systems. These fall under the scope of IS/IEC 60947: Part 5: Section 2: 2007, a standard that outlines safety, construction, and performance requirements for proximity switches

On Day 7 of our 30 Days, 30 Insights on BIS Scheme X, we’re turning our attention to an important category—semiconductor controllers and contactors for non-motor loads. Covered under IS/IEC 60947: Part 4: Section 3: 2020, this standard applies to products used for precise switching and control in systems that

Today, we’re focusing on IS/IEC 60947: Part 4: Section 2: 2020, which brings semiconductor motor controllers, starters, and soft starters under the scope of mandatory BIS Scheme X certification. These components are essential in modern motor control systems, offering smoother operation, energy efficiency, and reduced mechanical stress, especially in high-performance

Today’s spotlight is on IS/IEC 60947: Part 4: Section 1: 2018—a standard that focuses on electromechanical contactors and motor-starters, which play a crucial role in low-voltage switchgear and controlgear applications. These components are essential to motor control systems, commonly used in industrial automation and machinery. Ensuring their performance and safety

Today’s focus is on IS/IEC 60947: Part 5: Section 1: 2016, a key standard that will soon fall under mandatory BIS Scheme X certification. This standard applies to low-voltage switchgear and controlgear, specifically control circuit devices and switching elements that are critical for automation and electrical safety. It covers a

Today, we’re highlighting the IS/IEC 60947: Part 3: 2012 standard, which will soon require mandatory compliance under BIS Scheme X certification. This standard applies to low-voltage switchgear and control gear, specifically switches, disconnectors, switch disconnectors, and fuse-combination units used across both AC and DC utilisation categories. These components play a

Highlighting IS/IEC 60947: Part 2: 2016, a critical standard under BIS Scheme X that governs low-voltage switchgear and control gear, specifically focusing on circuit breakers. This standard is essential for ensuring the safety and reliability of electrical systems, as it applies to a wide range of low-voltage circuit breakers designed

Suppose your business deals with low-voltage switchgear and control gear products; understanding the Scheme X Certification is not just important. In that case, it’s essential to stay compliant and unlock growth opportunities in the world’s fourth-largest economy. Introduced by the Bureau of Indian Standards (BIS), Scheme X applies to products

BIS has published the first revision of the standard Digital Television Receiver for Satellite Broadcast Transmission – Specification. Now the previous version IS 18112:2022 has been revised and updated to IS 18112:2025 setting new benchmarks for Digital TV (DTV) Receivers for Satellite Broadcast Transmission in India.  What’s New in IS

The Bureau of Indian Standards (BIS) has officially published a notification (Gazette of India, Extraordinary, dated 20th May 2025) announcing the establishment of new and revised Indian Standards for multiple product categories.  This update impacts all manufacturers, importers, and suppliers who are currently manufacturing or planning to manufacture products falling

To achieve uniformity with the world safety standard, the Bureau of Indian Standards, following comprehensive internal and stakeholder consultations, has finally rolled out the standard IS/IEC 62368-1:2023, applicable for Audio/Video (AV) and Information and Communication Technology (ICT) Equipment.  Important pointers: The Indian Standard IS/IEC 62368-1:2023 is technically equivalent to the

India has shown significant growth towards transition toward e-mobility and this growth is happening at the grass root level by also ensuring energy efficiency in EV infrastructure is crucial.  The Bureau of Energy Efficiency (BEE) has taken a proactive role in this transformation by including Li-ion traction batteries and Systems, Tyre

The Bureau of Energy Efficiency (BEE) has extended the validity of star ratings for Light Commercial Air Conditioners (LCACs) under the mandatory regime. The new star rating validity period will be now 1st July 2023 to 31st March 2026. Manufacturers or permittee holders who wish to continue selling their approved models must

The Ministry of Steel has issued a clarificatory order on the Quality Control Order (QCO) that directly affects all steel products covered under mandatory BIS certification. If you’re importing steel products into India, it’s not enough that only the finished products meet BIS standards. Now, the intermediate materials used like:

The Ministry of Heavy Industries, Government of India, has officially extended the implementation timeline for the BIS Scheme-X (Omnibus Technical Regulation) Order, 2024. New Date of Implementation:  1st September 2026 (Extended from the earlier date of 28th August 2025)  This regulation covers a broad list of machinery and electrical equipment,

Extension of Timeline for Filing Annual Returns under Battery Waste Management Rules, 2022 The Ministry of Environment, Forests & Climate Change has extended the timeline for Filling Annual Returns Under the Battery Waste Management Rules, 2022 for the FY 2024-25. New Deadline: 30th September 2025. This extension offers producers more time

On 26th March 2025, the Ministry of New and Renewable Energy (MNRE) released Guidelines for Implementation of Revised QCO “Solar Systems, Devices and Components Goods Order, 2025”. The new QCO implements the new revised standard IS 16169: 2019/ IEC 62116: 2014 (Utility – Interconnected photovoltaic inverters), IS 17980: 2022/ IEC

The Ministry of Environment, Forest and Climate Change (MoEF&CC) has released a draft notification under the Plastic Waste Management Rules, 2016, further strengthening the Extended Producer Responsibility (EPR) framework and encouraging the adoption of recycled plastic in packaging. Key Highlights of the Draft Notification: 1. Mandatory Use of Recycled Content:

The Ministry of Environment, Forests & Climate Change has extended the timeline for filing Annual Returns under the Battery Waste Management Rules, 2022, for the FY 2024-25. New Deadline: 30th September 2025.   This extension offers producers more time to ensure they fulfil their EPR obligations accurately and efficiently.   Note: Producers are advised

The Bureau of Indian Standards (BIS) has officially extended the implementation timeline for the revised standard IS 3745: 2024—Yoke Type Medical Cylinder Valve with Pin Index Connection. Originally set for implementation by 14 April 2025, the new deadline is now extended to 14 April 2026, following industry feedback and requests

The Bureau of Indian Standards (BIS) has officially extended the implementation deadline for the revised standard IS 302 (Part 1): 2024 IEC 60335-1: 2020 —– a much-awaited step that has major implications for the household and similar electrical appliances industry.  The order was originally scheduled to take effect on March

The Ministry of Electronics and Information Technology (MeitY) has officially extended the implementation deadline for compliance with IS 18112:2022 — the Indian Standard for Digital Television Receivers for Satellite Broadcast Transmission — under the Compulsory Registration Order (CRO). This move comes following consultations with industry stakeholders to ensure seamless industry

On 1 July 2025, the Ministry of Environment, Forest and Climate Change (MoEF&CC) introduced a landmark Extended Producer Responsibility (EPR) framework focused on the management, recycling, and refurbishment of scrap from non-ferrous metals like aluminium, copper, and zinc. This move aligns with India’s commitment to resource efficiency and circular economy,

The Ministry of Environment, Forest and Climate Change (MoEF&CC) has announced an extension for filing your Annual Returns under the Plastic Waste Management Rules, 2023, for the financial year 2024–25. New Deadline: 31st July 2025 Who does this apply to? Producers Importers Brand Owners (PIBOs) Plastic Waste Processors (PWPs) Why this

The Bureau of Indian Standards (BIS) has officially extended the implementation timeline for the revised standard IS 3745: 2024—Yoke Type Medical Cylinder Valve with Pin Index Connection. Responding to industry feedback and manufacturers’ requests, BIS has extended the implementation deadline from 14 April 2025 to 14 April 2026, allowing more

The Telecom Engineering Centre (TEC) has proactively issued a detailed clarification to strengthen compliance for Smart Electricity Meters, specifying how EMI/EMC and Safety test reports from BIS-recognised laboratories will be accepted and documented to ensure greater accuracy and transparency. Key Points:  For equipment tested on or before 12.06.2025: TEC will

The Bureau of Energy Efficiency (BEE) has extended the star rating validity for Light Commercial Air Conditioners (LCAC) under the mandatory regime. The new star rating validity period will be now 1st July 2023 to 31st March 2026.  Manufacturers or permittee holders who wish to continue selling their approved models

The Department for Promotion of Industry and Internal Trade (DPIIT) has announced two important amendments to the Air Conditioner and its related Parts, Hermetic Compressor and Temperature Sensing Controls (Quality Control) Order, 2019. These changes directly impact manufacturers in the air conditioning and refrigeration industry. Exemption for Hermetic Compressors Over

Bureau of Indian Standards (BIS) has issued guidelines for the implementation of Amendment No.1 to IS 16333 (Part 3): 2022 – Indian Language Support for Mobile Phone Handsets.  Key Changes Introduced in Clause 6:  BIS mandates that each mobile phone handset must include an instruction manual, either in printed form

TEC has recently approved the criteria for issuing provisional certificates under MTCTE for telecom equipment with specialised test requirements. Below are the criteria for Equipment to qualify and apply for provisional certification: S. No.  Details of Telecom Equipment  Criteria  1  Router  1. Operates in single or three-phase with current requirement

On May 7, 2025, the Department of Telecommunications (DoT) reaffirmed its commitment to consumer safety by issuing a fresh notification on Specific Absorption Rate (SAR) standards for mobile handsets. This reinforces the requirement that all mobile devices sold in India must comply with the SAR limit of 1.6 W/kg (averaged

The Bureau of Indian Standards (BIS) has officially extended the implementation deadline for the revised standard IS 302 (Part 1): 2024/IEC 60335-1: 2020—a much-anticipated move with significant implications for manufacturers of household and similar electrical appliances. Originally slated for enforcement from March 17, 2025, the new implementation date is March

The 1st technical committee meeting for monitoring and streamlining the implementation of Machinery and Electrical Equipment Safety (Omnibus Technical Regulation) Order, 2024, was successfully held under the Chairpersonship of Shri Vijay Mittal, Joint Secretary, at MHI, in Udyog Bhawan, New Delhi. This significant meeting focused on shaping the overall OTR

The Bureau of Energy Efficiency (BEE) has officially launched the Star Labelling Program for Evaporative Air Coolers under its Voluntary Scheme, effective 1st July 2025. Starting 1st June 2025, manufacturers and traders can begin applying through the BEE Star Label Portal. The detailed program schedule, performance benchmarks, and testing criteria

The Bureau of Indian Standards (BIS) has extended the implementation timeline for the revised standard IS 17SSO (Part 1): 2024 — “Household Refrigerating Appliances — Characteristics and Test Methods — Part I: General Requirements.” Originally scheduled for enforcement from 12 May 2025, the new implementation date is now extended to

The Central Pollution Control Board has issued a notice extending the filing deadlines for quarterly and annual returns under the E-Waste (Management) Rules, 2022, for the Financial Year 2024–25. New Deadline: Returns can now be submitted on the Centralised Portal till 30th June 2025, extended from the earlier date of

The Ministry of Communications has released draft rules titled “Use of Low Power and Very Low Power Wireless Access Systems including Radio LAN in Lower 6 GHz Band (Exemption from Licensing Requirement) Rules, 2025” under the Telecommunications Act, 2023.  Objective: To enable license-free usage of the 5925-6425 MHz frequency spectrum

The Ministry of Commerce & Industry has officially extended the implementation date for the mandatory BIS-ISI certification under IS 302 (Part 2/Sec 75) for electrical appliances for commercial dispensing and vending machines.  The order was originally scheduled to take effect on 1st April 2025, but a revised timeline for its

To drive better fuel efficiency and smarter energy use, the Bureau of Energy Efficiency (BEE) has extended the Voluntary Star Labelling Program for Tyres by 1 year. New Star Rating Validity: 1st July 2025 to 30th June 2026  Manufacturers willing to continue their registered models beyond 30th  June 2025 should process

The Ministry of Communications has released draft rules titled “Use of Low Power and Very Low Power Wireless Access Systems including Radio LAN in Lower 6 GHz Band (Exemption from Licensing Requirement) Rules, 2025” under the Telecommunications Act, 2023.  Objective: To enable license-free usage of the 5925-6425 MHz frequency spectrum

The National Centre for Communication Security (NCCS), under the Department of Telecommunications, has released the final Indian Telecom Security Assurance Requirements (ITSAR) for a few more product categories to enhance the security framework of India’s telecommunications infrastructure. The enforcement date of these product categories is not yet finalised.  Below are

The Ministry of Heavy Industries has announced an extension to the implementation timeline under the Electrical Equipment (Quality Control) Second Amendment Order, 2024. Originally scheduled for May 10, 2025, the new effective date is now November 10, 2025, offering the industry an additional six months for compliance readiness.  Products Covered

The Bureau of Energy Efficiency (BEE) has extended the validity of the existing star rating table of Distribution Transformers, Pedestal Fans, Air Compressors, Table/Wall fans, Side by Side/Multi Door Refrigerators and Induction Hobs. The new validity periods are as follows:  Product  New Validity  Distribution Transformer 1st July 2017 to 31st

BEE have opened the link submitting the production data upload (i.e. paying of the star labelling fee) for the fiscal year 2022-23 and 2023-24. All permittees/manufacturers registered under BEE’s Standards & Labelling (S&L) Program are required to complete the respective process as per the given table.   Financial Year  Deadline to

The Ministry of New and Renewable Energy (MNRE) has released a QCO for “Solar Systems, Devices and Components Goods Order, 2025” for Solar Photovoltaic (PV) Modules for the implementation of revised standards as seen in below table below.  S. No.  Product  Existing IS standard  Revised Standard notified in QCO  Indian

On 26th March 2025, Ministry of New and Renewable Energy MNRE has released a QCO under “Solar Systems, Devices and Components Goods Order, 2025” for Power Invertors for use in Photovoltaic Power Systems for the addition of Standard of IS/IEC 61683: 1999 (procedures for measuring the efficiency of power conditioners

The Ministry of Environment, Forest and Climate Change (MoEF&CC) has officially notified the Construction and Demolition (C&D) Waste Management Rules, 2025, which will come into effect from April 1, 2026. These rules aim to enhance sustainable waste management practices, promote recycling, and reduce the environmental impact of construction activities Key

The Bureau of Indian Standards (BIS) has issued guidelines for implementing IS 16270: 2023, covering secondary cells and batteries for solar photovoltaic applications. This change comes under the Solar Systems, Devices, and Components Goods Order, 2025.     The last date for the implementation of the new standard for the existing licenses

The Bureau of Energy Efficiency (BEE) has extended the star rating validity for Deep Freezers (under the mandatory regime). The new start rating validity will be 1st July 2023 to 31st December 2025.  Manufacturers or permit holders wishing to continue selling their models must apply for model continuation by 30th

The Ministry of Environment, Forest & Climate Change has notified mandatory labelling requirements under the Plastic Waste Management (Amendment) Rules, 2016, setting new labelling and marking standards for plastic packaging  Key Provisions 1. Each plastic packaging shall have the following information printed in English, namely: Name and registration certificate number

The Government of India (GOI) has recently reported a concerning event: appliances being sold on e-commerce platforms without the mandatory BEE Star Labels, or worse, with fake or misleading labels. This practice not only misguides consumers but also violates national energy efficiency regulations, putting public trust and environmental goals at

The Bureau of Indian Standards (BIS) has issued guidelines for implementing IS 16270: 2023, covering secondary cells and batteries for solar photovoltaic applications. This change comes under the Solar Systems, Devices, and Components Goods Order, 2025.  Key Highlights:  Maximum Charge Current I10A  Inclusion of Lithium Battery Type and other electrochemistry 

MEITY has released a notification dated 12th March 2025 that “ER-01 compliance is not required for Analogue CCTV camera. Furthermore, the BIS has issued a notification dated 1 April 2025, providing clarity on the procedure to be followed by applicants for ER-01 compliance regarding CCTV cameras.  The latest guideline of BIS is as

The National Centre for Communication Security (NCCS) has issued a notification concerning the Security Certification of Optical Network Terminal (ONT) and Optical Line Terminal (OLT) products under the ComSec scheme. This new notification replaces the one issued on December 6th, 2024.  Key Points of this notification: The voluntary security certification

This is to inform the Producer, Importer, and Brand Owner (PIBOs) that the annual filing for FY 2024-25, Plastic Waste Management, is now open. As per regulatory requirements under the Plastic Waste Management Rules, all PIBOs are required to submit their annual return.  If you fail to do so, it will be considered non-compliance

The Department of Telecommunications (DoT) has extended the M2M registration deadline to March 31, 2025, providing unregistered entities offering M2M services or WLAN/WPAN connectivity additional time to comply and prevent service disruptions. If you are a product manufacturer or manage IoT-enabled devices such as smart meters, connected vehicles, industrial automation systems, healthcare devices, or

The Ministry of Environment, Forest, and Climate Change has introduced an amendment to the Battery Waste Management Rules, 2022, for Marking and Labelling effective from their publication in the official gazette. These rules may be called the Battery Waste Management (Amendment) Rules, 2025.    To further streamline compliance with labelling requirements, the

The Telecom Engineering Centre (TEC) has announced the effective date and list of products covered under MTCTE phase VI. Below is the list of products covered under the new phase.   S.No.  Telecom Equipment  Essential Requirements (ER) No & Name  1  Cellular Customer Premises Equipment  TEC40012408 (Cellular Customer Premises Equipment)  2 

A meeting was held under the Chairmanship of Sh. Sushil Pal, Joint Secretary (IPHW), Ministry of Electronics and Information Technology (MeitY) on 09.01.2025 to review the status of implementation of the notification of Essential requirements for security of CCTVs notified in CRO 2021.   The key points covered in the meeting

The Ministry of New and Renewable Energy (MNRE) released a Gazette notification on January 27, 2025, titled “Solar Systems, Devices and Components Goods Order, 2025“, updating the standards for existing products. While no new products have been introduced, this update applies to all five existing products and will come into

The National Centre for Communication Security (NCCS) has recently released the draft ITSAR for L2 and L3 LAN Switches and is inviting all the stakeholders to review the draft ITSAR and provide their valuable feedback.   Key Details:  Last Date to submit feedback: March 14th, 2025  How to Submit Feedback: 

The Ministry of Commerce and Industry has issued the Flashlight (Quality Control) Order, 2025, which came into effect on January 21, 2025, upon its publication in the Official Gazette. Key Requirements: All flashlights must comply with Indian Standard IS 2083:2024  Products must display the Standard Mark (BIS Certification) under Scheme-I

The Ministry of Textiles introduced the Medical Textiles (Quality Control) Amendment Order 2025, on 1st January 2025 which came into force on the date of its publication in the Official Gazette.  This order requires that Medical Textiles must comply with their respective Indian Standards. The products must display the Standard

TEC has announced an extension for the exemption of several critical test parameters and standards under the MTCTE framework until June 30, 2025. This extension impacts a wide range of products and equipment, providing manufacturers additional time to comply with certain standards.   Details of the Exempted Parameters  Product /ER  Variant  Parameters/Interfaces

The Ministry of Commerce and Industry has introduced the Refrigerating Appliances (Quality Control) Amendment Order, 2025, which came into effect on January 16, 2025, upon its publication in the Official Gazette Key Requirement: All refrigerating appliances must comply with their respective Indian Standards and bear the Standard Mark (BIS Certification)

The Bureau of Energy Efficiency (BEE) has extended the validity of the existing star rating table of tyres. The new validity periods are as follows:  Product  New Validity  Tyres  1st January 2022 to 30th June 2025  To keep your model’s registration with BEE active, the respective product category permittee is

On January 23, 2025, the Ministry of Environment, Forest, and Climate Change (MoEFCC) issued a notification marking significant updates to the Plastic Waste Management Rules, 2016 for Marking and Labelling. These rules may be called the Plastic Waste Management (Amendment) Rules, 2025. Effective Date:  From July 1, 2025, producers, importers,

The Ministry of Environment, Forest, and Climate Change has notified the Environment Protection (End-of-Life Vehicles) Rules, 2025. The rules, will come into effect from April 1, 2025, and aim to promote waste reduction, material reuse, disposal, recycling, and management of End-of-Life (EOL) vehicles.   Key Highlights of the Notification:  Responsibilities

The guideline for the Extended Producer Responsibility (EPR) Electronic Trading Platform (ETP) has been introduced by the Ministry of Environment, Forest, and Climate Change (MoEF&CC) to enhance the transparency and efficiency of trading EPR certificates for waste management.   EPR ETP is to focus on sustainability by allowing companies to trade EPR certificates.

Overview of Draft DPDP Rules On January 3, 2025, the Ministry of Electronics and Information Technology (MeitY) released the draft Digital Personal Data Protection (DPDP) Rules 2025. A 45-day public consultation period is now open, allowing stakeholders to submit feedback—whether objections or suggestions—until February 18, 2025. This phase is crucial

Telecommunication Engineering Centre (TEC) has recently announced several amendments and modifications in the official MTCTE procedure. The same has been outlined below: The MTCTE Procedure Clause 2.1(iii) Previously Stated: “Associated model means the model of a telecom equipment formed by using chassis/ motherboard and cards/ access ports of another tested

The Ministry of Commerce and Industry has issued the Electrical Appliances for Domestic Clothes Washing (Quality Control) Order, 2024, which came into effect on November 1, 2024, as per its publication in the Official Gazette. Under this notification, all Electrical Appliances for domestic clothes washing must adhere to the Indian

The Ministry of Commerce and Industry has issued the Aluminium and Aluminium Alloy Products (Quality Control) Order, 2024, which will come into effect on 1st April 2025. As per this notification, goods or articles listed in the below table must comply with the corresponding Indian Standards and bear the Standard

The National Centre for Communication Security (NCCS) recently announced the security certification procedure for products listed by the manufacturer as end-of-sale (EoS) or end-of-life (EoL).   No security certification is required for products that have been classified as EoS before the mandatory date of certification. For such EoS products, the

With reference to Policy Circular No. 6/2023-24 dated 19 October 2023, DGFT’s import authorisation/ Import License under HSN 8471, which includes laptops and tablets has been extended till 31st Dec 2024.   Along with the extension, DGFT has come up with an announcement that importers under HSN 8471 are required

The Telecommunications Engineering Centre (TEC) has recently announced several amendments and modifications to the official MTCTE procedure. These changes are outlined below: The previous version of clause 5.4 stated: “Only complete-in-itself, standalone, independent equipment are tested and certified under MTCTE. Equipment modules/components are not covered by MTCTE. Further, combinations of

On October 9, 2024, the Ministry of Electronics and Information Technology (MeitY) issued a notification confirming a six-month extension for the implementation of the “Electronics and Information Technology Goods (Requirement of Compulsory Registration) Order, 2021” for CCTV cameras. The new implementation date for this order is now April 9, 2025.

In a recent notification dated 21st March 2024, BEE has issued a notification for all the manufacturers/permittees of Solar Photovoltaic Modules (also called solar panels) w.r.t energy efficiency criteria. Here’s a comparison of the old and new ratings:  Existing Star labelling criteria for Solar PV modules  Star Rating  Effective efficiency

As part of “Strategic Interventions for Green Hydrogen Transition (SIGHT) Programme Component I: Incentive Scheme for Electrolyser Manufacturing Tranche II,” the government aims to: Boost indigenous electrolyser manufacturing capacity. Lower the cost of hydrogen production. Ensure competitive product performance and quality. Increase domestic value addition. Support established and promising technologies.

India’s automotive sector is rapidly growing, with significant potential for electric vehicles (EVs) to lead the market. The government has introduced various initiatives like FAME and PLI schemes to promote EV adoption. Objective: To position India as a global hub for manufacturing electric passenger cars, fostering employment, and advancing the

Amendments to the Registration and Functions of Vehicle Scrapping Facility Rules in India have been introduced with several important changes. Here are the Key Highlights of the Amendments: No Incentives for Government or Impounded Vehicles: Government-owned or impounded vehicles handed over by enforcement agencies will no longer receive incentives on

The CPCB announced recently that the deadline for recycling e-waste has been extended until April 30, 2024, which was originally set for March 31, 2024.   Here are some key points from the notification:   All producers must fulfil their Extended Producer Responsibility (EPR) by purchasing an equivalent quantity of EPR Certificates

TEC has extended the final acceptance date of NABL-accredited lab test reports for Optical Fibre (Single Mode)/ Optical Fibre Cable by four months. The reports will be accepted till 31st August 2024.   As earlier notified other clauses will remain the same such as:   The parameters are mentioned in the ER of

TEC has exempted the Parameters/ Interfaces to all applicable ERs under MTCTE up to 30th June 2024, which are mentioned as follows:  S.No  Parameters/ Interfaces Name (as per ER)  Remarks   1  5G NR (FR1)  Exempted for all applicable  ERs  2  5G NR (FR2)  3  5G NR- FR1 & FR-2

To promote energy efficiency and conservation efforts nationwide, on March 12, 2024, the Bureau of Energy Efficiency (BEE) during its 22nd Foundation Day celebration, unveiled two new product categories named Packaged Boiler and Commercial Beverage Coolers (Visi Cooler) under the voluntary list of Standard and Labeling scheme.     Here are the

The Bureau of Energy Efficiency (BEE) has initiated a voluntary Star Labelling program for Grid-connected Solar Inverters.   This is a big step forward for India’s Standards and Labeling (S&L) program. Through this initiative, there is a projection of achieving energy savings of 21.1 billion kWh and a significant reduction of 15.1 million

With the festival season around the corner, there’s a rise in demand for food items like samvat rice, buckwheat flour (kuttu atta), chestnut flour (singhara atta), milk and milk products such as Khoya and sweets, fruits, veggies, and more. However, some unscrupulous Food Business Operators (FBOs) compromise quality for profit,

Recent scrutiny by the Food Safety and Standards Authority of India (FSSAI) and the National Commission for Protection of Child Rights (NCPCR) highlights the mislabelling of certain food products on e-commerce platforms, particularly those falling under the classification of ‘Proprietary Food’, such as Dairy Beverage Mix, Cereal Beverage Mix, or

The Ministry of Environment, Forests & Climate Change, Government of India (MoEF&CC) introduced amendments to the Plastic Waste Management Rules, 2016, on March 14th, 2024, aiming to strengthen plastic waste management practices. Here are the key changes: Changes have been made to the definitions of biodegradable plastics, importer, manufacturer, producer, and seller. Manufacturers

The Central Pollution Control Board (CPCB) has issued crucial guidelines regarding Extended Producer Responsibility (EPR) for plastic packaging. Here are the key points you need to know: As per the guidelines producers, importers and brand owners (PIBOs) and plastic waste processors (PWPs) are required to register on the EPR portal developed

The Central Government has taken proactive steps to enhance the management of battery waste by introducing significant amendments to the BatteryWaste (Management) Rules, 2022. Here are the key highlights of the latest amendments: 1. The Central Pollution Control Board (CPCB) will determine the highest and lowest prices for EPR #certificates. These prices will

Recently, the Central Government introduced amendments to The E-waste (Management) Rules, 2022, focusing on enhancing e-waste management practices. Here are the key highlights: New Definition: A new definition for “dismantler” has been introduced, any person or entity engaged in dismantling used electrical and electronic equipment and components, following rules set

Recently on 27th Dec 2023, the Bureau of Indian Standards (BIS) revised the standard for Storage cells/Batteries (IS 16270: 2014) for Solar applications to IS 16270: 2023. The scope of this standard has been changed from “This standard applies to secondary cells and batteries of lead-acid and nickel-based chemistry” to “This

Green Credit is more than just a financial product, it’s a commitment to sustainability. It offers businesses the opportunity to access credit facilities while also incentivizing green initiatives. Whether it’s investing in renewable energy, implementing energy-efficient technologies, or adopting eco-friendly practices, Green Credit encourages businesses to reduce their carbon footprint

On February 29th, the Department for Promotion of Industry and Internal Trade (DPIIT) made an important announcement regarding the quality control of Resin Treated Compressed Wood Laminates used for electrical, chemical, and general purposes.     From January 14, 2025, the below specified resin-treated compressed wood laminate products must meet certain Indian

Starting March 11, 2024, the process for submitting Periodic Safety Update Reports (PSURs) regarding Marketing Authorization of New Drugs, Subsequent New Drugs (SND), Fixed Dose Combinations (FDC), Biologicals, and Veterinary products must be made online via the Sugam portal at www.cdscoonline.gov.in.    Offline submissions in hard copy or any other mode

To enhance efficiency and consistency in the sampling procedures of drugs, cosmetics, and medical devices, while also ensuring the maintenance of a centralized monthly database of NSQ (Not of Standard Quality)/Spurious drugs, the CDSCO has drafted regulatory guidelines.    These guidelines have been formulated to be adopted by drug inspectors of

Department of Chemicals and Petrochemicals has revised the implementation dates for the mandatory requirement for ISI Marks for Methyl Acrylate and Ethyl Acrylate in a Quality Control Amendment.    Initially, the order was set to be implemented on 29th February 2024. However, after careful consideration, the Department has revised the implementation

In a groundbreaking move, the Department of Chemicals and Petrochemicals issued a Quality Control Order (QCO) on 26 Feb 2024 making ISI Mark mandatory for three distinct categories of petrochemical products which are as follows:    Indian Standard Title of Indian Standard Poly Vinyl Chloride (PVC) Homopolymers  IS 17658:2021  Polypropylene (PP)

In a notification dated 3rd November 2023, Solar PV modules were introduced in the voluntary regime of BEE under the S&L program, to mitigate carbon emissions and promote renewable energy in India.   In alignment with energy-efficient regulations for Solar PV modules, BEE has updated the fee structure to encourage the production

On January 30, 2024, the Department of Chemicals and Petrochemicals issued the Quality Control Amendment Order, 2024. Initially, implementation dates for certain chemicals were set in February. However, these dates have been revised, and the new implementation schedule is as follows:   Morpholine: Effective from 1st August 2024. Acetic Acid: Effective

On January 29, 2024, the Central Pollution Control Board (CPCB) issued a notification stating that all producers must meet their Extended Producer Responsibility (EPR) target for the financial year 2023-24 by March 31, 2024.   Producers are also required to submit Quarterly & Annual reports on the E-Waste EPR Portal within

As you all are aware BEE introduced Ceiling fans under the mandatory scheme in May 2022, with two-star rating tables based on sweep sizes.  However, in a recent notification dated January 23, 2024, under the Standards & Labeling (S&L) program, BEE has revised the star label tables for ceiling fans.  

TEC has recently notified the acceptance of Exemption/ Test Reports/ Self Declaration of Conformity against the parameters of the ‘PON category of Broadband Equipment’ category. Below are the parameters FYR: Protocol Test for any PON Interface (as per standards mentioned in ER): Exempted till 30 June 2024 Automatic Laser Shut

After excluding certain categories such as Smartwatches, Mobile Phones, Cameras, etc., TEC has also removed the Hybrid Set Top Box from the scope of the MTCTE. As a result, MTCTE phase-5 now encompasses only 6 product categories, namely: ❖ 5G Core ❖ Hypervisor ❖ IP terminal ❖ E-band Fixed Radio

On 8th January 2024, TEC notified the industry of various exemption from the submission of test reports for the below-mentioned test Parameters/Interfaces under MTCTE. The relaxation for these test parameters has been extended up to 30th June 2024 or till further orders from the department.   Recently, TEC also extended the

On 1 January 2024, the Department for Promotion of Industry and Internal Trade (DPIIT) announced a Quality Control Order (QCO) in which they have made it mandatory for Electrical Accessories such as Cable Trucking and Ducting systems, Bayonet Lamp holders, Live Working Gloves, insulating mat etc to carry an ISI

Department of Telecommunications ( DOT ) has now started accepting online applications for voluntary certification of telecom devices in India. The online module for the Voluntary Certification Scheme has been launched by the department and has become operational for Type/Interface approvals from 7 July 2023. With this, the following certificates can

The government of India launched the National Single Window System (NSWS), a unified platform, offering a one-stop solution for all necessary approvals, licenses, registrations, and clearances designed to streamline the approval processes required by investors. In collaboration with TCS, Invest India has developed an NSWS portal tailored for the Central

BEE has introduced an update in one of the clauses of the Operational Manual alternatively known as the Disseminating Star Labelling in Household Appliance (DISHA) Manual.   This modification specifically pertains to the Second Check Testing; a component of the Market Surveillance processes. To provide clarity, both the original clause

Based on stakeholder consultation and the consent of MEITY the parallel testing has been changed from a Pilot Project to a Permanent scheme for BIS-CRS. As per the latest notification dated 9th Jan 2024, all products can be tested using parallel testing now.    Important Point   It is important to note

The timeline for the self-certification of Solar PV Inverters for CRS certification has been extended till 31st Dec 2024. This extension is granted due to the limited availability of test facilities for certain capacities, allowing more time for compliance. Specifically, the extension applies only to SPV Inverters with a capacity exceeding

On 1 January 2024, the Department for Promotion of Industry and Internal Trade (DPIIT) announced a Quality Control Order (QCO) in which they made it mandatory for the following products of laboratory glassware to carry an ISI Mark.   Graduate measuring cylinders One- Mark volumetric flasks Narrow-necked boiling flasks Single

Central Pollution Control Board (CPCB) issued a notification regarding the E-Waste EPR registration under the E-Waste (Management) Rules, 2022 and subsequent amendments, the following entities are exempt from registration: 1. Importer of Electrical and Electronic Equipment (EEE) not listed in Schedule-I of E-Waste (Management) Rules, 2022 includes components, consumables, parts,

The Department for Promotion of Industry and Internal Trade (DPIIT) initially set January 1, 2023, as the date for making the ISI Mark mandatory for Refrigerating Appliances. Yet, the enforcement was later rescheduled to January 1, 2024, allowing manufacturers more time to ensure compliance. As of the latest update, the

The Bureau of Energy Efficiency (BEE) has extended the validity of the Star Rating table of Distribution Transformers. The star rating validity, originally set to expire on 31st December 2023, has now been extended for another year until 31st December 2024. Consequently, the validity period for approved models will now

Regarding the implementation of the QR code, the Bureau of Energy Efficiency (BEE) has released a notification dated December 5, 2023. According to this notification, all permittees and manufacturers of Self-Ballasted Light Emitting Diode (LED) Lamps registered under the Standards & Labeling (S&L) program of BEE are instructed to refrain

On January 1, 2024, the Department of Consumer Affairs, made it mandatory for all packaged goods to display their “date of manufacture” and “unit price”. Before this announcement, companies had the choice to print either the manufacturing date, import date, or packaging date. But now, companies have been mandated to

The mandatory date for security testing of Wi-Fi CPEs and IP Routers has been extended by an additional three months. Initially set for 1 January 2024, it has now been rescheduled to start from 1 April 2024. TEC will now begin accepting online applications for security certification via the integrated

TEC has extended the mandatory certification deadline for certain products covered under MTCTE phases III and IV. The new deadline for 12 products has been moved from January 1, 2024, to April 1, 2024. The extended categories are as below:   Phase-III  Base Station for Cellular Network  Repeater for Cellular Network 

India’s satellite communication services are gearing up to revolutionize telemedicine, distance education, and business growth through enhanced connectivity. This advancement is set to facilitate cross-regional expansion for companies, ushering in fresh opportunities and customers while boosting the economy. To make progress in India’s satellite communication sector recently a New Telecom

On 22 December 2023, the Control Pollution Centre Board issued a notification remanding entities like Producers, Manufacturers, Recyclers, and Refurbishes dealing with e-waste to register on the EPR E-Waste Portal by December 31, 2023. It’s crucial to adhere to these rules. Operating any e-waste-related business without proper registration could lead to

Ministry of Road Transport & Highways – India (MoRTH) has issued a notification in which they mandated air-conditioned cabins of motor vehicles belonging to categories N2 and N3 manufactured from 1st October 2025. This directive specifically targets commercial trucks/ motor vehicles used to carriage goods within the N2 and N3

Following the notification issued on 17th November 2023, the Bureau of Energy Efficiency (BEE) has announced an extension in the deadline for applying for the Model Degradation process for registered models of Washing Machine. The revised deadline is now extended until February 29, 2024. For further details in this regard,

On December 14th, 2023, the DPIIT made it mandatory for Rubber Gaskets used in Pressure Cookers to carry the ISI Mark.    This rule becomes official six months after being published in the Official Gazette.   Implementation dates for Micro and Small Enterprises (MSEs) are:    🔰 Small Enterprises have until September 14,

On December 11, 2023, the Department for Promotion of Industry and Internal Trade (DPIIT) announced a Quality Control Order (QCO). They’ve made it mandatory for Cycle and Rickshaw Tyres and Tubes to have an ISI Mark.    As per the directive, the order will be officially placed after six months of

To enhance safety measures, the Department for Promotion of Industry and Internal Trade (DPIIT) issued a pivotal order on December 8, 2023, specifying the mandatory requirement of ISI Mark for the following hinge types: Stainless steel butt hinges Steel Butt Hinges Non-ferrous metal butt hinges Tee and strap hinges Parliament

The Department for Promotion of Industry and Internal Trade (DPIIT) recently issued a Quality Control Order (QCO) that makes the ISI Mark mandatory for Safes, Safe Deposit Locker Cabinets, and Key Locks. This regulation will take effect six months after its publication in the Official Gazette. Here are the specific

CPCB has come up with an update to the E-waste Extended Producer Responsibility (EPR) online portal. The portal has been updated with new features. The latest improvements represent a major advancement in simplifying and maximizing Producers’ EPR obligations. Key Updates Include: 1. Portal has been updated to file the Annual

The Food Safety and Standards Authority of India (FSSAI) expresses significant concern regarding the excessive use of pesticides, non-permitted wax coatings, artificial ripening agents, and synthetic colours in the treatment and packaging of fresh fruits and vegetables. To address the problem FSSAI urges strict vigilance by State/UT authorities on Food

The Department for Promotion of Industry and Internal Trade (DPIIT) made a significant announcement on November 21, 2023. A Quality Control Order was issued, declaring the mandatory requirement of the ISI Mark for Steel Wires or Strands, Nylon or Wire Ropes, and Wire Mesh.    As per the directive, the order

The Department for Promotion of Industry and Internal Trade (DPIIT) on November 21, 2023, made a Quality Control Order mandating ISI Mark on Legal Metrology- Material Measures of Length such as woven metallic, glass fibre tape measures and steel tape measures. As per the directive, the order will be officially

In recent times, spam calls and messages have posed a persistent challenge for mobile users, despite the Telecom Regulatory Authority of India (TRAI) making numerous efforts to tackle this issue. Despite their efforts, spam communication remains a major concern for consumers. Recently, TRAI has taken proactive measures by instructing businesses

In continuation to the Department’s OM No. 18-10/2008-IP dated 25.01.2012 and 17.08.2012 regarding Specific Absorption Rate (SAR) value for mobile phones, the following revised guidelines are hereby notified: 1. The information concerning SAR values and safety precautions should also be made available digitally through online means, such as online links,

The Department of Telecommunications (DoT) is introducing new rules for buying and selling SIM cards that will be enforced nationwide from December 1, 2023, with an aim to curb rising scam cases. The new rules include:    SIM dealer verification: All SIM card dealers must undergo mandatory verification. Demographic data collection:

The Ministry of Environment, Forests & Climate Change, Government of India (MoEFCC) has issued a directive under Section 5 of the Environment (Protection) Act, 1986, requiring all registered producers, importers, and brand owners (PIBOs) of FY 2022-23 to file their annual reports on plastic packaging waste by November 30, 2023.

Importers of High-pressure Gas Cylinders, Please be Aware! The exemptions and relaxations provided in the Gas Cylinders Rules, 2016 by the Department for Promotion of Industry and Internal Trade (DPIIT), as mentioned in the PIB Press release dated 15 May 2021, were valid only until 30 June 2022. As of

The Bureau of Energy Efficiency (BEE) has recently issued a critical notification concerning Washing Machines. These key updates are essential for your attention:   Starting from January 1st, 2024, BEE certification becomes mandatory for the manufacturing, import, sale, or trade of Washing Machines in India. A new energy performance rating table

In a proactive move to enhance consumer safety and product quality, the Department for Promotion of Industry and Internal Trade (DPIIT) issued a Quality Control Order (QCO) on October 23, 2023. This order makes the ISI Mark mandatory for various types of door fittings which are as follows: ❖ Door

The Bureau of Energy Efficiency (BEE) has launched the Standards and Labeling Program for Solar Photovoltaic Modules, aiming to reduce carbon emissions and promote renewable energy in India. Here are the key points: ❖ The program encompasses all sizes, capacities, and types of solar panels manufactured and imported in India

The Bureau of Energy Efficiency (BEE) has extended the current star rating system for Tyres until the end of 2024. This means that Tyres registered under BEE’s Standard & Labeling program can keep using their existing sample label until December 31, 2024. To comply with this extension, manufacturers or permittees

The Food Safety and Standards Authority of India (FSSAI) has established regulations regarding fortified foods, particularly fortified rice, and the labelling of ingredients. Food Business Operators (FBOs) need to specify the exact source of iron salt used in their products. This should be done by the provisions outlined in the

On September 25, 2023, DPIIT issued a vital order, mandating ISI Mark on Precision Roller and Bush Chains, along with attachments and associated chain sprockets. This directive comes into full effect on March 25, 2024. The rollout dates for Small and Micro Enterprises (SMEs) are as follows: 🔰 Small Enterprises:

The Ministry of Environment, Forests & Climate Change (MoEFCC) has introduced the Battery Waste Management Rules of 2023, aimed at refining the Battery Waste Management Rules of 2022. These provisions took effect on October 25, 2023, and bring important changes: 1. The updated definition of “Battery” now excludes battery components, a

The Ministry of Environment, Forest and Climate Change (MoEFCC) has introduced amendments to the Plastic Waste Management Rules, 2016, in the “Plastic Waste Management (Second Amendment) Rules, 2023″.   These amendments aim to enhance the nation’s plastic waste management policies. Here are the key changes:   1. The deadline for

With the upcoming festive season, the demand for sweets, savouries, and milk products like Ghee, Khoya, and Paneer is on the rise. Unfortunately, the temptation for adulteration also increases due to economic incentives. To counter this, FSSAI has urged Food Safety Officers and Designated Officers to conduct special surveillance and

In a groundbreaking move, DPIIT introduced a Quality Control Order (QCO) on October 17, 2023, making ISI Mark mandatory for Drums and Tins under the BIS-ISI scheme effective from April 17, 2024.    The ISI Mark is mandatory on the following types of drums and tins:   1. Bitumen Drums 2. Large

On October 23, DPIIT issued a significant Quality Control Order (QCO) mandating ISI Mark on Helmets for the Police Force, Civil Defence, and Personal Protection. It’s an applaudable step taken to ensure the future of those who protect and serve our country.   The order will come into effect from

In a recent update, the Bureau of Energy Efficiency (BEE) has announced an extension of the validity for the existing star rating table for pump sets, till 31st December 2025. Therefore, the updated validity period span is from 1 February 2020 to 31 December 2025.  This extension pertains to Diesel

CPCB is in the process of notifying EPR holders through individual emails, urging you to complete your PWM annual filling by or before October 31, 2023. We highly recommend that you act promptly to ensure compliance (ignore if you have already done so). Here are essential points to be aware

On October 19, 2023, the Directorate General of Foreign Trade (DGFT) introduced significant changes to import rules for IT Hardware and electronic items categorized under HSN 8471.    1. The new license regime applies to laptops, computers, tablets, and servers. 2. Importers can apply for authorizations without quantity, value, or country

On 25 September 2023, the DPIIT issued a Quality Control Order (QCO) for Miscellaneous Steel Products which will come into effect from March 2024 and makes ISI Mark mandatory for below listed products:  Steel Pipe Flanges: 15155:2020 Steel Cylinders for Pipes with Mortar Lining and Coating: 16651:2017 Stainless Steel Tubes

To promote the health and safety of healthcare workers and patients, The Ministry of Textiles ordered on September 27, 2023, that the following medical textile products should carry the ISI Mark and conform to the corresponding Indian Standard. Sanitary Napkins: IS 5405:2019  Baby Diaper: IS 17509:2021  Reusable Sanitary Pad, Sanitary

The Indian Standard IS/IEC 62368-1, which is currently in its second revision, is open for public comments as of October 16, 2023. This standard has been developed by the Technical Committee LITD 07 of the Bureau of Indian Standards (BIS). Originally published in 2018, it was initially identical to the

The Ministry of Consumer Affairs, Food and Public Distribution has announced the Legal Metrology Amendment Rules for Packaged Commodities, 2023, which amends the 2011 Rules. These rules will come into effect on 1 January 2024. 1. These rules introduce crucial changes, including the addition of definitions for “combination package,” “group

The BEE department has introduced significant changes in the Chillers product category which are outlined below: 1. Starting from 1st January 2024, Water-cooled and Air-cooled chillers are included in the mandatory certification regime. This means that BEE S&L certification and the star label are compulsory before launching these products in

The Central Drugs Standard Control Organization (CDSCO) has granted an extension of six months for Class C & D medical devices which were mandated under the licensing regime effective from 1 October 2023. This means importers and manufacturers of Class C & D medical devices can continue their activities for

The Bureau of Energy Efficiency (BEE) has granted an extension for submitting Production Data Updates (PDU) and labelling fees for the fiscal year 2022–23 until October 31, 2023. Applicants who may have missed the initial submission deadline are urged to promptly remit both the PDU and labelling fees within this

From March 25, 2024, all self-contained drinking water coolers in India must be ISI Certified under the Indian Standard IS 1475 (Part 1):2001. This is a health-saving step by the Department of Promotion of Industry and Internal Trade (DPIIT). Nothing in this Order shall apply to goods or articles manufactured

On August 10, 2023, the Petroleum and Explosives Safety Organisation (PESO) issued an important notice about the SETT Level III implementation for printing 2D barcodes on explosives at the unit level (excluding detonators). Here’s what you need to know: ✅ In reference to the circular dated June 15, 2023, it

The Department for Promotion of Industry and Internal Trade (DPIIT) issued a Quality Control Order (QCO) on July 14, 2023, and made ISI Mark mandatory for insulated flasks, bottles, and containers for domestic use to boost consumer safety and product quality. Giving manufacturers six months to comply from the date

In a significant continuation, CPCB has taken another monumental step by introducing a comprehensive framework for the generation of EPR certificates, specifically targeting key metals extracted from E-waste. CPCB has classified the metals into the following groups- 1. Precious Metal: Gold (Au) 2. Non-Ferrous: Copper and Aluminium 3. Ferrous: Iron

On September 12, 2023, BEE (Bureau of Energy Efficiency) made an announcement regarding refrigerators (both Frost Free and Direct Cool) registered under their Standards and Labelling program. In this announcement, BEE has temporarily suspended the requirement for manufacturers and permittees to use QR codes on their appliances until further notice.

In a significant move toward environmental responsibility, the Ministry of Environment, Forest and Climate Change has introduced the Hazardous and Other Wastes (Management and Transboundary Movement) Second Amendment Rules, 2023.  These rules will be effective from April 1, 2024, marking a major milestone in Extended Producer Responsibility (EPR) for used

The Aluminum and Aluminum Alloys Order, 2023, is bringing a quality revolution to the industry. Every aluminium Product (ingot and casting), whether domestically manufactured or imported for sale or use in India, must bear the ISI certification by November 31, 2023. Aluminium is one of the most versatile and essential

Department For Promotion Of Industry And Internal Trade (DPIIT) has released a Quality Control Order (QCO) for solar DC cables and fire survival cables to bear a mandatory ISI mark from February 24, 2024, under a license from the Bureau of Indian Standards as per Scheme-1 of Schedule-II to the

The Department of Telecommunications (DoT), in March last year, had requested TRAI seeking their advice on rationalizing the Entry Fee and Bank Guarantees associated with various licenses in the telecom industry.  In its response, TRAI issued the consultation paper for the same wherein all the relevant stakeholders/ industry associations participated

From February 29, 2024, it is mandatory for Plywood and Wooden Flush Door Shutters to be ISI-Certified. This covers plywood for general purposes, structural, marine, and fire-retardant plywood. In a fire situation, plywood burning releases toxic gases and leads to suffocation to humans. Including fire-retardant plywood under the ISI standard

The product manuals of the consumer footwear and footwear components products have been revised to make the Scheme of Inspection and Testing ( SIT) compliance optional for Micro and Small-Scale Units (MSSUs) concerning the following requirements are not compulsory:   Maintaining test records.  Maintaining a suitably equipped and staffed lab

The Telecom Engineering Centre (TEC) has extended the mandatory certification date for phase III and phase IV products by three months, i.e., from October 1, 2023, to January 1, 2024. This extension applies to 32 products (ERs) such as Gateway, Router, LAN Switch, IoT gateway, Tracking Devices, Equipment Operating in

CPCB is actively reminding all EPR holders through mail to submit their annual filing on or before October 31, 2023. Please be informed of the following points-  EPR-holders under PWM Regulations who received their EPRs before March 31, 2023, are legally obligated to submit their annual returns online to avoid

As per the Gazette released on July 21st by the CPCB regarding Waste Tyre Extended Producer Responsibility (EPR), an important interim arrangement has been introduced. Here’s what you need to know:  Under the Waste Tyre EPR, the CPCB has implemented an interim solution to manage EPR exchange credits. All producers

It is mandatory for all nuts, bolts and fasteners manufactured or imported for sale or use in India to be ISI-certified from 𝟐𝟏𝐬𝐭 𝐉𝐚𝐧𝐮𝐚𝐫𝐲 𝟐𝟎𝟐𝟒. The goods or articles listed in Column 1 of the Table below must meet the Indian Standard specified in Column 2 of the Table and

Under the E-waste Management Rules, 2022, recyclers now must obtain EPR Certificates through the EPR Portal with CPCB providing an interim arrangement to generate and transfer EPR-End-Product-Credits-Certificates to producers. Recyclers are also required to maintain records of their transactions of sales and purchase procurement of raw materials, sales of end

The Bureau of Energy Efficiency (BEE) has commenced suspension of the BEE applicant portal of entities that did not submit their Production Data Upload (PDU) for the fiscal years 2017-18 to 2021-22. Despite repeated notifications from the BEE department regarding submitting production data for the fiscal years 2017-2022, the department