On 8th January 2024, TEC notified the industry of various exemption from the submission of test reports for the below-mentioned test Parameters/Interfaces under MTCTE. The relaxation for these test parameters has been extended up to 30th June 2024 or till further orders from the department.
Recently, TEC also extended the mandatory date of certification for 12 product categories under phases III and IV of MTCTE. In the same direction, test requirements such as 5G NR testing under Router ER, certain protocol tests for PON devices and gateway products, and various tests for Optical Fiber Cables have been extended.
| S. No. | Product Name/ Variant | Parameters/interfaces Name
(As Per Er) |
Standard Name (As Per ER) | Remarks |
| 1. | Media Gateway | MGCP Connection Model | H.248 C1.6. Annex- P5 | Exempted |
|
2. |
Mobile Radio Trunking System |
Frequency Band for MRTS | NFAP, Anne- C1 |
Exempted for- ETSI EN 300, 390 ETSI EN 300, 296 ETSI EN 300, 341 & ETSI EN 302 561 |
| Conformance to standards for MRTS | ETSI EN 300 xxx, ETSI EN 301 xxx, 302 xxx. Annex-C3 | |||
| Max RF Power Output for MRTS Base Station | As per Dot WPC, License Conditions, Annex- C2 | |||
|
3. |
Repeater for Cellular Network |
GSM Repeater Station Operating Frequency | NFAP. Annex- F |
Exempted |
| GSM Repeater Station Parameters | 3GPP TS 51.026 & TS 45.005. Annex-F6 | |||
| WCDMA Repeater Station Parameters | 3GPP TS 25.143. Annex- F7 | |||
| WCDMA Repeater Station Operating Frequency | NFAP. Annex- F
|
|||
| LTE Repeater Station Operating Frequency | NFAP. Annex- F
|
|||
| LTE Repeater Station Parameter | 3GPP TS 36.143. Annex- F8 | |||
|
4. |
Precision Timing Protocol Grand Master Equipment |
Max. Peak Voltage for 10 MHz Interface | G.703. Annex- 1 |
Exempted |
| Max. Peak Voltage for 10 MHz Interface
|
G.703. Annex- 1
|
|||
| Profile for Frequency Synchronization | Annex- P11 | |||
| Profile for Time & Phase Synchronization with full-timing Support | Annex- P11
|
|||
| Profile for Time & Phase Synchronization with Partial timing Support | Annex- P11
|
|||
| Pulse Shape for 10 MHz Interface | G.703. Annex- 1
|
|||
| Pulse Width for 1 PPS Interface | G.703. Annex- 1
|
|||
| Rise Time for 1 PPS Interface | G.703. Annex- 1
|
|||
|
5. |
VHF/UHF Radio System Equipment |
Frequency for VHF or UHF Equipment | NFAP. Annex- C1 | Exempted For-
ETSI EN 300 390, ETSI EN 300 296, ETSI EN 300 341, ETSI EN 300 698, ETSI EN 300 783, ETSI EN 300 720, ETSI EN 301 925, ETSI EN 302 178. |
| Conformance to Standards for VHF or UHF Radio Systems | ETSI EN 300xxx
ETSI SN 301-xxx Annex- C3 |
|||
| Max Transmit Power for VHF or UHF HH Station | As Per DoT/WPC License Conditions. Annex-C2 | |||
|
6. |
Radio Broadcast Receiver |
Frequency of Operation for Radio Broadcast Receiver | Annexure-R-A1 Frequency (In Annexure to ER of Radio Broadcast Receiver) |
Exempted |
| GPS | Annexure-R-A1 Navigation (In Annexure to ER of Radio Broadcast Receiver) | |||
| NavIC | Annexure-R-A1 Navigation (In Annexure to ER of Radio Broadcast Receiver)
|
|||
| 7. | PON Family of Broadband Equipment | Protocol Test for any PON Interface | As per the Interface mentioned in PON ER | Exempted |
|
8. |
ADSLx |
Bit Rate for ADSLx Interface | Annex- J1 |
Exempted |
| Impulse Noise Protection for ADSLx Interface | Annex- J1
|
|||
| Insulation Test for ADSLx Interface | Annex- J1
|
|||
| Line Port Impedance for ADSLx Interface | Annex- J1
|
|||
| Loop Resistance for ADSLx Interface | ETSI EN 300 001 Annex- J1 | |||
| PSD for ADSLx Interface | Annex- J1 | |||
| Transmitted Power at ATU-C for ADSLx Interface | Annex- J1 | |||
|
9. |
VDSLx |
Bit Rate for VDSLx Interface | G.993. or G.993.2.
Annex-J1 |
Exempted |
| Insulation Test for 2 Wire Interface | ETSI EN 300 001. Annexe-D | |||
| Line Port Impedance for VDSLX Interface | G.993. or G.993.2.
Annex-J1
|
|||
| Loop Resistance for VDSLx | ETSI EN 300 001. Annex-J1
|
|||
| Profiles for VDSLx | G.993. or G.993.2.
Annex-J1
|
|||
| PSD for VDSLx Interface | G.993. (c1 6.2) or G.993.2. (c1 7.2)- Annex A B C. Annex-J1
|
|||
| Return Loss for VDSLx | G.993. or G.993.2.
Annex-J1
|
|||
| Transmitted Power at ATU-C for VDSLx Interface | G.993. or G.993.2.
Annex-J1
|
|||
| 10. | Router | ER Interface:
1. 5G NR (FR1) 2. 5G NR (FR1 & FR2 Interworking with Other Radios) 3. 5G NR (FR2) |
All the Parameters corresponding to these Interfaces in ER | Exempted |
|
11. |
Optical Fiber (Single Mode) |
Mechanical Characteristics Proof Test for Minimum Strain Level | As Per Variants of ER |
Exempted |
| Material Properties- Fiber Materials- The Substance of which the Fibers are Made | As Per Variants of ER
|
|||
| Colour Qualifications for Color Fiber MEK RUB Test (Methyl Ethyl Ketone) | As Per Variants of ER
|
|||
| 12. | Optical Fiber Cable | Colour Qualifications for Color Fibers | As Per Variants of ER
|
Exempted |
| Lightning Test | FOTP- 181, ITU-T K-47 | |||
| DC Resistance | IEEE 1138: 2009 | |||
| Short Circuit Test | IEEE 1138: 2009/IEC 60794 –1–2-H1
|
|||
| Lightning Arc Test | IEEE 1138: 2009
|
|||
| Flame- Spread Bunched Cable | IEC/EN 60332-3-24:2018, Cat C | |||
| Smoke Test/ Smoke Density Test | IEC/EN 61034-2 | |||
| Acid Gas (Toxicity) (Test on Toxic Gases evolved during Combustion of material of Cables) | IEC/EN 60754-2
|
|||
| Flame Retardant | IECTR62222 IEC 60332-1-2 | |||
| Electrical Characteristics- Power Feeding Wires | IEC 60228,
IEC 60502-1, IEC 60227-1, IEC 61156-1, IEC 61196-1-10x, BS EN 60304 |
|||
| Transfer Impedance & Coupling Attenuation | IEC 61156-1 | |||
| The requirement for Fire Performance of Optical/Metallic Hybrid Cables should meet fire safety regulations. | IEC TR 62222 |
For more information, access the notification from here or please write to us for any more clarifications in this regard at tec@vincular.in
Follow our WhatsApp Channel or watch our Publication Space for the latest regulatory updates.
